Regal 190 DualBurn technical specification

Please note that heating times vary depending on multiple factors such as outside temperature, wood type, initial water temperature, etc.

Note that these are maximum seating capacities. For more freedom of movement, Skargards recommends planning for 2-3 persons below the maximum capacity.

This number is for a full hot tub without persons. With people inside, you need less water. We recommend to fill the tub with water up to 80% capacity.

Integrated design

The Regal features the first-ever integrated stove designed to heat the water with natural circulation. The pressure generated by the fire pulls in the cold water through a lower channel. As it is heated between the stove’s double walls, the water flows up and back into the tub through the second upper channel. Without any electrical components, this circulation ensures an even temperature throughout the entire hot tub.

DualBurn® technology

The DualBurn® stove is equipped with a second chamber that transfers heat from the smoke before it exits through the flue. The result is 35% faster heating than the standard Regal stove and 50% greater fuel efficiency than the traditional stove on the Panel hot tub.

Skargards' signature ergonomic tub is crafted with 5 layers of glass fibre reinforced plastic because it is a strong, durable and lightweight material.

The Regal features a robust base frame made of galvanised steel. There is a circular foot in the centre that is surrounded by 7 or 8 feet on the edge of the hot tub. The feet are 4 cm in height so that hoses and wires can be led out at any point. This elevation also optimises air flow between the cladding and the tub, which in turn prevents condensation.

The Regal features a robust base frame made of galvanised steel. There is a circular foot in the centre that is surrounded by 7 or 8 feet on the edge of the hot tub. The feet are 4 cm in height so that hoses and wires can be led out at any point. This elevation also optimises air flow between the cladding and the tub, which in turn prevents condensation.

Located underneath the stove, the draining valve can be easily accessed. A 2-meter hose is included to direct the water outflow.

The Regal is delivered fully assembled and equipped with everything you'll need. All hot tubs from Skargards are built for long-lasting durability, produced with the highest quality materials. Each hot tub can be complemented with accessories such as an insulated lid, a side table and steps.

Standard features

• Integrated wood stove made of AISI 316 stainless steel
• Coated cast iron stove door with hardened glass window
• Ergonomic tub
• Galvanised steel base frame
• Sustainably-sourced, eco-certified Thermowood® cladding
• Fine-polished stainless steel flue
• Brass draining valve

Every Skargards hot tub is designed and produced in Åmål, Sweden with the near-exclusive use of Scandinavian materials.

Get instant access to the Skargards instruction manual for the Regal hot tub.

Regal DualBurn

• Download PDF